Štítky: 3d trucker, flsun qq s, genius delostrelectva, portabl tlačiareň, vlákna petg, 3d tlačiarne príslušenstvo profil, delostrelectvo x1, vlákna chko, 3d muž tričko, 3d tlačiarne.

€275.29 €482.97
  • Skladom
  • w681


  • Typ Rozhrania: USB
  • Spotrebný Materiál Priemer: 1.75 mm
  • Farba Rýchlosť Tlače: 60-150 mm/s
  • Zdroj Napájania: 360W
  • Názov Značky: flsun
  • Fliament: CHKO, ABS, PETG,BOKY,DREVO
  • CE Certifikácia: Áno
  • Plátok Hrúbka: 0.1-0.4 mm
  • Formát Súboru: STL,G-Kód
  • Pôvod: CN(Pôvodu)
  • Displej: Dotykový Displej
  • Tryska Priemer: 0,4 mm
  • Jazyk: angličtina
  • Posteľ Temp: 110℃
  • Priemer Temp: 200℃
  • Molding Technology: FDM
  • Maximálna Rýchlosť Tlače: 150mm/s
  • Automatické Vyrovnávanie: Áno
  • Rám: Kovová Konštrukcia
  • Maximálna Veľkosť Tlače: 255*360 mm
  • Presnosť: 0.1
  • Hrúbka vrstvy: O 0,05-0,3 mm
  • Plátok Softvér: CURA, Zjednodušiť
  • Tlač Veľkosť: priemer 255*360 mm
  • Napätie: 110-220V
  • Číslo Modelu: FLSUN QQ-S-PRO
  • Maximálna Pracovná Rýchlosť: 150mm/s
  • Rýchlosť Tlače: 60 mm/s



Alindtattack
2020-12-22
5/5
In general, everything works well out of the box. Geometry is slightly unmet. 2 axis offset from center by 1-2 hundred more than the third (for Delta it plays a role). Autolevel works, if you update the firmware from the flash drive in the kit and dig with the settings, the printing is very even. The seller is sociable, but I did not use it. There is one problem in the design itself, the extruder is very long distance from the nozzle, from which there is a lag in the supply of plastic because of the elasticity/softness of plastic, if the extruder was closer to the nozzle, the quality would increase significantly, as an option, it can be hung on the ties above the nozzle. In general, the device is satisfied and recommend, the Delta is very interesting printers and this is not a bad instance.
Doctoor8
2020-11-19
5/5
The delivery was fast, too. The printer's performance was also up to specification. The only thing that was unfortunate was the lack of monitoring app related to 3D printers. I wish you all the best in the future. I hope your business thrives.
Amylou2000
2021-01-26
5/5
The printer chose for a long time, but still stopped on this, looks unusual and beautiful, works also beautifully. Packed well, already collected half. Even the straps are already inserted in place and it is enough then only the block to the lid to pull. In the kit there are spare nozzles, sensors. It's amazing that after the assembly there is a bunch of screws left, I did not understand where they need to be screwed, but it looks like it's also spare.
Ronnscifi
2020-09-11
5/5
The printer was sent quickly, everything is whole. Complete with spare sensors, heating element for extruder, 200gr plastic, all necessary tool for Assembly, printer settings and maintenance. On the flash drive video instructions for assembling the printer, replacing plastic, setting up, etc. Assembled is not difficult, the main thing is carefully according to the instructions. The seller is sociable, helps, if necessary, quickly answers questions. I am very pleased with the purchase :) immediately printed the test model (also were on the memory card)

Napísať recenziu

Súvisiace produkty